1 ecl pro? sy10ep16v micrel, inc. m9999-112805 hbwhelp@micrel.com or (408) 955-1690 pin function d, /d ecl data inputs q, /q ecl data outputs v bb reference voltage output v cc positive power supply v ee negative power supply description faster version of the sy10el16v guaranteed ac performance over temperature and supply voltage: C dc to 3ghz clock throughput C <180ps tr/ft time internal 75k ? input pulldown resistor improved output waveform characteristics 10k ecl compatible i/o available in small 8-pin (3mm) msop and soic packages the sy10ep16v is a high-speed differential receiver. the device is functionally equivalent to the el16v devices, with higher performance capabilities. with output transition times significantly faster than the el16v, the sy10ep16v is ideally suited for interfacing with high- frequency sources. the sy10ep16v provides a v bb output for either single-ended use or as a dc bias for ac coupling to the device. the v bb pin should be used only as a bias for the sy10ep16v as its current sink/source capability is limited. whenever used, the v bb pin should be bypassed to the most positive supply voltage (v cc for lvpecl) applications) via a 0.01 f capacitor. under open input conditions (pulled to v ee ), internal input clamps will force the q output low. all support documentation can be found on micrels web site at www.micrel.com. features 5v/3.3v high-speed differential receiver pin names ecl pro? sy10ep16v ecl pro? ecl pro is a trademark of micrel, inc. rev.: d amendment: /0 issue date: november 2005
2 ecl pro? sy10ep16v micrel, inc. m9999-112805 hbwhelp@micrel.com or (408) 955-1690 package/ordering information ordering information (1) package operating package lead part number type range marking finish sy10ep16vzc z8-1 commercial hep16 sn-pb sy10ep16vzctr (2) z8-1 commercial hep16 sn-pb sy10ep16vkc k8-1 commercial hp16 sn-pb sy10ep16vkctr (2) k8-1 commercial hp16 sn-pb sy10ep16vzi z8-1 industrial hep16 sn-pb SY10EP16VZITR (2) z8-1 industrial hep16 sn-pb sy10ep16vki k8-1 industrial hp16 sn-pb sy10ep16vkitr (2, 3) k8-1 industrial hp16 sn-pb sy10ep16vzg (3) z8-1 industrial hep16 with pb-free pb-free bar-line indicator nipdau sy10ep16vzgtr (2, 3) z8-1 industrial hep16 with pb-free pb-free bar-line indicator nipdau sy10ep16vkg (3) k8-1 industrial hp16 with pb-free pb-free bar-line indicator nipdau sy10ep16vkgtr (2, 3) k8-1 industrial hp16 with pb-free pb-free bar-line indicator nipdau notes: 1. contact factory for die availability. dice are guaranteed at t a = 25 c, dc electricals only. 2. tape and reel. 3. pb-free package is recommended for new designs. 1 nc d /d v bb 8v cc q /q v ee 7 6 5 2 3 4 available in 8-pin soic and msop packages
3 ecl pro? sy10ep16v micrel, inc. m9999-112805 hbwhelp@micrel.com or (408) 955-1690 symbol rating value unit v ee power supply voltage (v cc = 0) C6.0 to 0 vdc v cc power supply voltage (v ee = 0) +6.0 to 0 vdc v in input voltage (v cc = 0v, v in not more negative than v ee ) C6.0 to 0 vdc input voltage (v ee = 0v, v in not more negative than v cc ) +6.0 to 0 vdc i out output current Ccontinuous 50 ma Csurge 100 i bb v bb sink/source current (2) 0.5 ma t lead lead temperature (soldering, 20sec.) +260 c t a operating temperature range C40 to +85 c t store storage temperature range C65 to +150 c note : 1. permanent device damage may occur if absolute maximum ratings are exceeded. this is a stress rating only and functional oper ation is not implied at conditions other than those detailed in the operational sections of this data sheet. exposure to absolute maximum ratlng co nditions for extended periods may affect device reliability. absolute maximum ratings (1) t a = C40 ct a = +25 ct a = +85 c symbol parameter min. max. min. typ. max. min. max. unit i ee power supply current (2) 424242ma v oh output high voltage (3) v cc C1080 v cc C0890 v cc C0980 v cc C0810 v cc C0910 v cc C0720 mv v ol outuput low voltage (3) v cc C1950 v cc C1650 v cc C1950 v cc C1630 v cc C1950 v cc C1595 mv v ih input high voltage v cc C1230 v cc C0890 v cc C1130 v cc C0810 v cc C1060 v cc C0720 mv v il input low voltage v cc C1950 v cc C1500 v cc C1950 v cc C1480 v cc C1950 v cc C1445 mv v bb output reference voltage v cc C1430 v cc C1300 v cc C1350 v cc C1250 v cc C1310 v cc C1190 mv v ihcmr input high voltage v ee +2.0 v cc C0.4 v ee +2.0 v cc C0.4 v ee +2.0 v cc C0.4 v common mode range (4) i ih input high current 150 150 150 a i il input low current 0.5 0.5 0.5 a notes: 1. 10ep circuits are designed to meet the dc specifications shown in the above table after thermal equilibrium has been establis hed. the circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. 2. v cc = 0v, v ee = v ee (min.) to v ee (max.), all other pins floating. 3. all loading with 50 ? to v cc C 2.0v. 4. v ihcmr (min.) varies 1:1 with v ee , max. varies 1:1 with v cc . 5. input and output parameters vary 1:1 with v cc . dc electrical characteristics (1) v cc = 0v; v ee = C5.5v to C3.0v; v cc = 3.0v to 5.5v, v ee = 0v (5)
4 ecl pro? sy10ep16v micrel, inc. m9999-112805 hbwhelp@micrel.com or (408) 955-1690 t a = C40 ct a = +25 ct a = +85 c symbol parameter min. max. min. typ. max. min. max. unit f max maximum toggle frequency (1) 3 ghz t plh propagation delay to t phl output differential (2) d ? q, /q 100 300 150 200 250 200 300 ps t skew device skew 5.0 20 20 ps t r output rise/fall times q 60 180 60 110 180 70 180 ps t f (20% to 80%) notes: 1. f max guaranteed for functionality only. v ol and v oh levels are guaranteed at dc only. 2. v in = 800mv. ac electrical characteristics v cc = 0v; v ee = C5.5v to C3.0v; v cc = 3.0v to 5.5v, v ee = 0v
5 ecl pro? sy10ep16v micrel, inc. m9999-112805 hbwhelp@micrel.com or (408) 955-1690 8-pin msop (k8-1) rev. 01
6 ecl pro? sy10ep16v micrel, inc. m9999-112805 hbwhelp@micrel.com or (408) 955-1690 8-pin plastic soic (z8-1) rev. 03 micrel, inc. 2180 fortune drive san jose, ca 95131 usa tel + 1 (408) 944-0800 fax + 1 (408) 474-1000 web http://www.micrel.com the information furnished by micrel in this datasheet is believed to be accurate and reliable. however, no responsibility is as sumed by micrel for its use. micrel reserves the right to change circuitry and specifications at any time without notification to the customer. micrel products are not designed or authorized for use as components in life support appliances, devices or systems where malfu nction of a product can reasonably be expected to result in personal injury. life support devices or systems are devices or systems that (a) are intend ed for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant inj ury to the user. a purchasers use or sale of micrel products for use in life support appliances, devices or systems is at purchasers own risk and purchaser agrees to fully indemnify micrel for any damages resulting from such use or sale. ? 2005 micrel, incorporated.
|
